Contact Us

 

Shanghai Finzone Windows & Doors Co.,Ltd

Address:Room 1-506, No.615, Ningqiao Road, Shanghai, China

Contact:Alice Zhang

Tel:+86-21-50800521

Fax:+86-21-50320395

Mobile:+8617740863682

Email:finzone2001@gmail.com

           finzone08@gmail.com






Home > Knowledge > Content
The types of opening about balcony glazing Jun 28, 2018

the principle: a glass piece of glass pushed to the side of the balcony, open in the rotation.

Advantages: Full open, 100% release of balcony space; standing on the inside can easily clean the sides of the glass; single glass can be turned 90 degrees.

Disadvantages: Each piece of glass needs to pass through a designated craft mouth to open; and before opening the middle sash, it must open its front piece.

1. Process: Non-linear installation is more expensive and higher cost.

Applicable balcony: "one" shape, "L" type, circular arc, shaped, full coverage of all shapes. Principle: Every two pieces of glass are connected with a hinge, two pieces move together to the sides of the balcony, and rotate to open.

Advantages: Full open, 100% release of balcony space; two pieces of glass can be independently opened at any position; connecting two pieces of glass can be turned 90 degrees.

Disadvantages: Outdoor glass is inconvenient to clean.

2. Process: The installation is simpler and the cost is lower.

Applicable balcony: "one" shape, "L" type, circular arc, shaped, full coverage of all shapes. Principle: Two-track, three-track, and four-track push-pull structures have frameless windows. Multiple pieces of glass can be pushed on both sides of the balcony, but they cannot be rotated.

Advantages: The maximum opening area of the two-track, three-track and four-track is 50%, 60% and 75%, respectively.

Disadvantages: can not be fully open; outdoor glass is not easy to clean; safety factor lower than the two.

3. Process: Installation is the simplest and lowest cost.

Applicable balcony: only applicable to "one" shape, "L" type balcony.